2019-01-15T03:18 PM
(This post was last modified: 2019-02-01T06:51 AM by Lucile Gaultier.)
A ftp has been set up to broadcast outputs from the Skimulator.
The ftp will be populated as soon as data are available, and a README file describing the available data will be updated:
ftp://ftp.ifremer.fr/ifremer/ww3/PROJECT...tor/README
As for now, only global run are available for L2b and L2c products:
- Global L2b, L2c products derived from the Global WW3 at 1/4 degrees (inputs data: ftp://ftp.ifremer.fr/ifremer/ww3/HINDCAS..._MITGCM_1Y) :
ftp://ftp.ifremer.fr/ifremer/ww3/PROJECT...018_8a_025
- Global L2b, L2c products derived from the Global WW3 at 1/4 degrees for the error (inputs data: ftp://ftp.ifremer.fr/ifremer/ww3/HINDCAS...MITGCM_1Y/) and the Global mitgcm interpolated at 1/12º for the currents:
ftp://ftp.ifremer.fr/ifremer/ww3/PROJECT...op_2018_8a
Note: there is a known issue with land mask on this data, data == 0 should be considered as masked.
The ftp will be populated as soon as data are available, and a README file describing the available data will be updated:
ftp://ftp.ifremer.fr/ifremer/ww3/PROJECT...tor/README
As for now, only global run are available for L2b and L2c products:
- Global L2b, L2c products derived from the Global WW3 at 1/4 degrees (inputs data: ftp://ftp.ifremer.fr/ifremer/ww3/HINDCAS..._MITGCM_1Y) :
ftp://ftp.ifremer.fr/ifremer/ww3/PROJECT...018_8a_025
- Global L2b, L2c products derived from the Global WW3 at 1/4 degrees for the error (inputs data: ftp://ftp.ifremer.fr/ifremer/ww3/HINDCAS...MITGCM_1Y/) and the Global mitgcm interpolated at 1/12º for the currents:
ftp://ftp.ifremer.fr/ifremer/ww3/PROJECT...op_2018_8a
Note: there is a known issue with land mask on this data, data == 0 should be considered as masked.